Wednesday, April 05, 2017

New Oliver Pro Stock in Canada

Chan Nussey from Montreal in Canada is building a new Oliver Tractor for the 5780lbs. Pro Stock class at the moment. The Tractor receives a steel tube frame with a steel Rollcage, a sheet metal Oliver 2255 hood and sheet metal fenders. The frame, the cage and all the sheet metal parts were made and built by Haslag Steel from Washington, Missouri in the USA. The new ride of Chan has a Oliver 1850 rearend with carrier needle bearing, a ring and pinion gear out of a White 2150 Tractor and a Oliver stock gearbox housing with special made gears.
The Pro Stock will have a new 11" inch Crower Cluster centrifugal clutch with 5 discs, a Crower fly wheel and a new Browell aluminium clutch bell housing.
Chan purchased for his new vehicle a set of used Keizer aluminium rims with 24.5-32 Firestone Puller tyres.
The new Oliver Pro Stock Tractor will have a 3208 Caterpillar engine with 636cui. on diesel fuel. The power plant receives a Caterpillar 3208 engine block with revised stock Caterpillar cylinderheads, Demos camshafts and billet aluminium valve covers, a new counterweighted stock CAT crankshaft with billet rods and Ross Racing aluminium pistons, a homemade intake and exhaust manifold, a 4.5" inch billet Columbus turbocharger, a Bosch P3000 diesel fuel pump, a External oil pump and a Data Max datalogger. All the engine work and parts were made by Kevin Taylor (Bad Kitty Motorsports), the owner and driver of the Agco Challenger Pro Stock Tractor called ,,Bad Kitty" from Lakeville, New Brunswick in Canada. The motor mounts and machining were done by Marc-Andre Simard of AFS and the paintjob of the Tractor was made by Jon van Horne at Auto Fit.
The maiden voyage of the new Oliver Pro Stock is planned for the season of 2017. Chan Nussey will compete on Tractor Pull events in Canada with his new ride.

For further information, check here: https://www.facebook.com/badkittymotorsports/














No comments: