Sunday, July 30, 2017

Photos Mitas Euro Cup Valtra Pulling Arena Brande 2017 - by Jan Lo --janwerners Pulling-Bilder--


Friday, July 28, 2017

The new VSP Bits ´n Pieces

From Loosdrecht in the Netherlands, Willem Veldhuizen, together with his son Daan and his Crew have built a new 3.5t / 7700lbs. Modified Tractor during the last winter. The new Tractor got a new lighter homemade Domex wedge frame with a new chrome-moly Rollcage (ROP), new lighter engine brackets, a homemade steering, homemade Alubond fenders and a Rockwell rearend. The new wedge frame of the Tractor was constructed by Berrie Boer of the Screamin´ Bobcat Pulling Team from Ijsselmuiden, in the Netherlands and the new Rollcage comes from the old Brothers Toy Light Modified Tractor. But what´s new and different on the new frame. The drivers position on the new chassis is more forward and the center of gravity is lower than on the old Double D chassis. The Team hopes to get a better balance with those changes in the future. The Dutch Team also saved weight with some small different changes on the new Mod. With all those new changes, the Tractor is 120kg / 264lbs. lighter than the old Double D Tractor. The Team has more movable weight on the front end of the new Bits ´n Pieces now. The new design on the fenders and the engine side shields were made by Centipede Reklame Productions from Loosdrecht in the Netherlands. The Dutch company called ,,M2ID´´ (Pullingart) from Sprundel brought the stickers on the Tractor. The new look remember a little bit on the old Magkal Bits ´n Pieces Super Stock in the late 90s.
The Rockwell rearend has a Humpco aluminium billet center section with a Humpco differential, a special made ring and pinion gear and Franklin aluminium planetary carrier housing with special made planetaries. The new Bits ´n Pieces also has a homemade Crossbox with special built gears, a homemade driveline and a SCS Reverser. Each John Deere power plant have a Crower centrifugal clutch with 4 discs and a Browell aluminium clutch bellhousing. Willem use for his new ride a set of Northern Sheen aluminium rims from Canada with new cut Firestone Puller 2000 HP tyres.
The new VSP Bits ´n Pieces is powered by 2 6 cylinder John Deere engines with 10.5l / 640cui. capacity on methanol fuel. Each power plant have a John Deere stock block with a VSP (Veldhuizen Special Product) billet steel crankshaft, VSP billet aluminium rods and pistons, Darton sleeves, a VSP aluminium billet cylinder head with billet camshafts, Victorie valves and springs, a homemade intake and exhaust manifold, 3 VSP Holset HX 82 turbochargers with billet intake wheels, a VSP fuel pump with a VSP fuel system, a Aviaid oil pump, a homemade fuel tank, a MSD 8 ignition and a RPM data logger. Each JD engine make around 3800hp and over 5000Nm torque on the dyno.
The Bits ´n Pieces Pulling Team compete with their new Modified Tractor in Dutch Grand National Championship (3.5t / 7700lbs. Mod and 4t / 8820lbs. Unlimited division) this year.
The Team is happy so far with the performance of the new twin John Deere powered Modified Tractor and everything is currently on the right way. The first 2 runs in Made, the Netherlands wasn´t perfect, but the last runs were pretty well in the past weeks. The Tractor is better drivable and brings the power much better on the ground than the old one now.

The Bits ´n Pieces Pulling Team would also like to give a big thanks to all their sponsors for the great support during the last 34 years !

for further information, check here:

or, check here:

Blue Belle sold !

The 4.5t Sport class Tractor called ,,Blue Belle" of Evert van Kruistum and Tony van Leeuwen from the Netherlands was sold to Germany.
The new owner of the Ford 9600 Tractor is Urs Sass from Ziehten, Schleswig-Holstein in North Germany. After some changes, Urs now competes with the Tractor in the German Championship of the 3.6t Super Sport class. Urs new ride also got a completely new name. The new name of the Ford is ,,Blue Trouble" now. Urs first competition in Grimmen with his new Toy was very successful. He finished in 3rd place, behind the both IH Tractors called ,,Never Enough" and ,,Red Evolution".

Tuesday, July 25, 2017

This Week / Weekend !

Tractor Pulling + Fast Pulling Agazzino 2017 - ITPO - Pure Sound!


NTPA GN Chapel Hill, TN (USA) 2017, Session 1:

NTPA GN Chapel Hill, TN (USA) 2017, Session 2:

NTPA GN Ionia, MI (USA) 2017, Session 1:

NTPA GN Ionia, MI (USA) 2017, Session 2:

NTPA Washington Court House, OH (USA) 2017:

NTPA Hartford, MI (USA) 2017:

NTPA Lebanon, OH (USA) 2017:

NTPA Monticello, IA (USA) 2017: The Session was cancelled due to inclement weather

NTPA Hilliard, OH (USA) 2017:

PPL Champions Tour Montgomery City, MO (USA) 2017:

PPL Champions Tour Platte City, MO (USA) 2017:

NTTO N Aagtekerke (NL) 2017:

DTP Hjallerup (DK) 2017:

OTTPA Warrensburg, MO (USA) 2017 Session 1:

OTTPA Warrensburg, MO (USA) 2017 Session 2:

Next Event from Finland

Tractior Pulling is better near the track

Video's PowerPull Hygum 2017 - by janwerners Pulling-Bilder

Tractor/Truck Pulls! 2017 Ionia Free Fair Pullsation! NTPA (Session 2)

Sunday, July 23, 2017

Sdr Hygum 2017 Supersport 3,6t

Photos Powerpull Sonder-Hygum 2017 - by Jan Lo --janwerners Pulling-Bilder--


Thursday, July 20, 2017

This Weekend !


DTTO Edewecht (D) 2017:

NTTO GN Cadzand (NL) 2017:

NTTO GN Langedijk (NL) 2017:

NTTO N Ijzendoorn (NL) 2017:

PPL Champions Tour Jerseyville, IL (USA) 2017:

PPL Silver Series Jerseyville, IL (USA) 2017:

PPL Champions Tour Henry, IL (USA) 2017:

PPL Silver Series Henry, IL (USA) 2017:

NTPA LaPorte, IN (USA) 2017:

NTPA Decorah, IA (USA) 2017:

NTPA Charlotte, MI (USA) 2017, Session 1:

NTPA Charlotte, MI (USA) 2017, Session 2:

NTPA New Hampton, IA (USA) 2017, Session 1:

NTPA New Hampton, IA (USA) 2017, Session 2:

NTPA Logansport, IN (USA) 2017:

NTPA Wilmington, OH (USA) 2017:

OTTPA Troy, MO (USA) 2017:

OTTPA Marthasville, MO (USA) 2017:

OTTPA Macon, MO (USA) 2017:

OTTPA West Liberty, IA (USA) 2017:

Light Modified 2,5t @ Edewecht 2017 by MrJo

Next event in finland 6 / 8 tyrnävä 2017

Pics results and videoclips after event.

                                      NTPA Region II Event Charlotte Michigan 7-13-2017

Monday, July 17, 2017

Team Team Lambada - Tractor Pulling Cadzand & Langedijk - Victorie & Cra...

Edewecht by

Edewecht 2017

powered by:

My pictures on your Homepage? No Problem! All pictures are also available in a higher resolution! just mailto:
Diese Photos für Ihre Homepage? Kein Problem! Alle Photos sind auch in höherer Auflösung verfügbar! e-Mail an:

Friday, July 14, 2017

The new Beautiful Noise

After a one year absence, the Slaedhunden Pulling Team around Leif Jorgensen and Bjarne Mortensen from Skandeborg in Denmark are back on the track with an new Modified Tractor.
The formerly Transmash Pullers started with their new V8 Mod project in the Winter of 2015/2016 in their workshop in Skandeborg. The new ride got a chrome-moly tube frame with an Ace Chassis chrome-moly ROP (Rollcage), a homemade hydraulic steering, carbon fiber fenders and a Rockwell rearend. Leif purchased the complete frame with the rearend from the Fox Pulling Team from Skjern in Denmark. In the package were also included the whole drivetrain of the old Fox Tractor. The fenders and the ROP were took over of the old Slaedhunden Modified. The carbon fiber fenders of the Tractor were built by the Rocket Science Pulling Team from Weert in the Netherlands. The Team run with a set of Midwest aluminium rims with Firestone Puller 2000 HP tyres on the new Mod. The rearend of the vehicle has a Rockwell aluminium diff with a special made ring and pinion gear, a Rockwell center section and Franklin aluminium planetary carrier housing with Franklin planetaries. The new Beautiful Noise also got a
billet driveline (built by Torben Larsen, Fox) and a SCS reverser. Each Hemi engine on the Tractor has a Browell aluminium clutch bellhousing and a 11´´ inch Crower centrifugal clutch with 2 discs.
The Beautiful Noise is powered by 4 Keith Black V8 Hemi engines with 526 cui. and 1 Arias V8 Hemi engine with 559 cui. on methanol. Because of the current engine limits, he can´t drive with all 5 engines in the 4.2t/9260lbs. Heavy Mod class currently in Europe and Denmark. Each of those 4 Keith Black engines have a KB cast aluminium block (1x Stage 2, 1x Stage 3, 1x Stage 5 and 1x Stage 6) with a billet crankshaft, billet aluminium rods and pistons, a homemade fuel tank, a Enderle fuel system with a Enderle methanol
fuel pump, a Littlefield Hi-Helix 8-71 blower with an Enderle aluminium scoop injector, a Nr.1 oil pump and a MSD Pro Mag 44 ignition. The both front KB power plants have Veney aluminium cylinder heads and back ones have BAE aluminium heads. The Arias V8 Hemi engine were purchased by the Cougar Pulling Team from Sweden. The Arias has a cast aluminium block with Arias heads, a billet crankshaft with billet aluminium rods and Arias pistons, a Littlefield Hi-Helix 8-71 blower with a aluminuim scoop, a MSD Pro Mag 44 ignition, a Enderle fuel system and a Enderle fuel pump. The Danish Team is satisfied with the first runs so far this year.
The Slaedhunden Pulling Team compete with their new ride in the Danish Championship and in the Euro Cup this year.

further information, check here: